Inner Shaft #93

#93 INNER SHAFT

Inner Shaft for the TXMC or the old style RMC motors.  The inner shaft has a keyway tip that fits into a slotted drive nut in the handpiece.  The inner shaft secures to the motor shaft with a set screw(included with the inner shaft.) BEFORE ATTACHING THE HANDPIECE make sure the shaft and sheath adjustment is checked carefully.  Place the entire unit on a flat surface with shaft and sheath extened straight so that the inner shaft extends 3/4" beyond the rubber outer sheath.  This is done by moving the sheath in or out of the motor connector (cone shaped piece with LEFT hand threads).  DO NOT USE OIL ON SHAFT OR SHEATH.

Grease shaft very lightly on  the spring.  www.ccspecialtytool.com/tube-flex-motor-shaft-grease

KEYWAY TIP DRIVE CABLE FOR porting & polishing TXMC MOTOR flex shaft www.ccspecialtytool.com/txmc-motor 

see also Sheath covering for 93 cable www.ccspecialtytool.com/sheath-motor-shaft

#93

drive cable 93