|
NEW ADAPTER FOR ADDITIONAL HANDPIECES
TO USED THE RMC MOTOR This Adapter when snapped on RMC Flexible Shaft enables you to use all Handpieces on Page 5-13. The Handpieces are threaded into Adapter. Imagine being able to get into the very smallest bore with a right angle (45 or 90) that is designed with sealed ball bearings. Also a straight very slim handpiece with ball bearings that runs cool and true. This will give your CC porting tool the versatility of owning several machines. $87.50 for new Long Adapter |
|
Now you may have a right angle handpiece with sealed ball bearings and a head height of only 7/8". this will allow you to get into all the small bore engines. Uses 1/8" collet to allow you to use 1/8" accessories. 3/32" collet available. By using Adapter it can be attached to RMC Motor Shaft. Extra Collets $50.00 $175.00 |
|
A new 45 degree R.A. with a head height of only 7/8". Has sealed ball bearings. When used with RMC Motor, it has a left hand rotation. Comes with 1/8" Collet. *Must Have Left Hand Cutters* $175.00 |
|
Now a slim line handpiece with sealed bearings that will let you get into the tight spots. Runs very cool and true. Also allows you to use 1/8" accessories. 3/32" collet available also. Extra Collets $50.000 $235.00 |
If you can't read it, then download Adobe Acrobat Reader©
