Porting and Polishing 2 Stroke #10 CC Kit
# 10 CC KIT ULTIMATE TWO STROKE PORTING AND POLISHING KIT
THIS IS OUR #1 SELLING KIT TO START PORTING & POLISHING 2 STROKE ENGINES WITH!
1- TXMC Hang-up Motor complete-HAS FULL POWER AT ANY SPEED, 1/2 hp peak with 1/3 hp at full load in any rpm! (ideal for aluminum)
1- 44MC Tapered handpiece with 1/4" & 1/8" collet (cylinder porting tool)
1- 1MC Right Angle handpiece with 1/8" collet (for two stroke transfer ports)
1- DC-26 1/4" X 2" Carbide cutter / burr (1/4" oval)
1- RC-26L 1/4" X 4" Carbide cutter / burr(1/4" taper)
2 - Pieces of 1/8" Carbide cutter / burr
1- Slotted Mandrel (1/4"shank)
1- Long Spiral Mandrel (1/4"X4"shank)
1- Regular Spiral Mandrel (1/4"X2-1/2"shank)
1- 1/8" Spiral Mandrel (1/8"X1-1/2"shank)
1- AM-20 Mandrel 1/8" (for #A-11)
1- AM-25 Mandrel 1/4" (for #A-11)
2 ea- A-11 Bullet Abrasives C-M-F (6 total)
10 ea- 3/8" X 1" Spiral Rolls (tapered) C- M-F (30 total) sandpaper abrasive
10 ea- 1/2" X 1" Cartridge Roll C-M-F (30 total) sandpaper abrasive
1- #10006 Grease (for Motor shaft)
1- #10010 Oil (for #1MC)
Includes the TXMC Hang-up Motor (1/3 Horse under full load at any rpm!) - Metal Foot-Control- Flexible shaft & sheath
As with all our kits substitutions can be made and you will still get the package savings
Kit with 230 volt SRMC motor available for foriegn and international applications ( -$20.00)
INCLUDES CARBIDE BURRS / CUTTERS
THE # 10 KIT COMES WITH OVER 90 PIECES OF EQUIPMENT TO GIVE YOU THE MOST COMPLETE, PROFESSIONAL GRADE, 2 STROKE PORTING AND POLISHING KIT AVAILABLE ANYWHERE AT ANY PRICE!
KIT INCLUDES THE 1MC ! ONE OF THE BEST POSSIBLE TOOLS FOR TRANSFER PORTS, OR ANY OTHER PORT OR AREA WHERE A RIGHT ANGLE TOOL IS NEEDED. WITH STRENGTH AND DURABILITY THE 1MC IS A GREAT CHOICE PROFESSIONALS MAKE!
AFFORDABLE LOW PRICE! PROFESSIONAL GRADE EQUIPMENT!
Best selling 2 stroke port and polishing kit
TJ's Tips for Porting: Left Hand cut burrs are the best thing to use for contra angles and areas where you tend to get skipping and chattering of the burr. Left Hand cut burrs are easy to use with the 1MC and a TXMC Motor, or the 182AMC if you have a SRMC Motor. Watch this video to learn how to use them properly :http://youtu.be/43Qb8tJ49A8
TJ's Tips for Porting: The proper technique for using a Right Angle Porting tool is very important. If you are new to the right angle porting tools used for modifying the transfer ports, or if you need a great technique for using these tools, watch this video http://youtu.be/43Qb8tJ49A8
INCLUDES 44MC THE BEST CYLINDER, CYLINDER HEAD AND INTAKE PORTING TOOL
2-Cycle, 2stroke, 2C, engine porting kit, cylinder porting kit for 2 stroke motors
PERFECT FOR TWO STROKE CYLINDER PORTING
See the VIDEO of the 1MC in ACTION at youtu.be/U_2JkElSAis
TXMC Hang-up Motor - HAS FULL POWER AT ANY SPEED which is essential for cutting and grinding on aluminum, plastic, or other soft metals or materials. 1/2 HP peak output !+++++++++TJ'S TIPS! THIS KIT IS SUPERIOR TO ANY ON THE MARKET FOR 2 STROKE PORTING+++++ SEE MORE PORTING INFORMATION AND TIPS www.ccspecialtytool.com/2-stroke-porting-and-polishing-tips-tj
ALL MOTORS COME WITH A 2 YEAR MANUFACTURERS LIMITED WARRANTY!