1MC RIGHT ANGLE HANDPIECE
#1MC 90 DEGREE RIGHT ANGLE HANDPIECE
The #1MC is our best right angle handpiece, and a must for porting two-stroke engines.
The #1MC will work great in 100cc and larger, in particular 2 stroke, engines. This handpiece has 5 bearings 2-roller and 3-ball bearings,a very sturdy tool . The head spindle is mounted in a roller bearing and in a ball bearing at the back. The spindle has a ball bearing at either end. This handpiece can be telescopically extended adding 3" to the length of the handpiece. There is an 1/8" collet OR 3/32" collet available for the #1MC (comes standard with an 1/8"collet).The two spanner wrenches for tightening your bit into the collet comes with the handpiece. Lubrication required.
DIMENSIONS: OA Length 7 3/4"-Extends to 10 7/8" - From Top of the head to collet end 1 3/8"
CC HAS A BETTER WAY! PORTING TOOLS PAY OFF!
"PORTING TOOLS PAY OFF"
1 800 762 6995
THE BEST TOOLS AT ANY PRICE!
CC has a better way. We sell the best tools for porting and polishing, with the best features for porting your motorcycle, snowmobile, jetski, powerboat, dragracer, or sport car engine. World speed records are set using our tools. Champions in motor sports use our equipment. The most competitive race teams use our porting and polishing tools. We sell the best in porting and polishing equipment and we back up our products.
ABOUT OUR PORTING AND POLISHING TOOLS AND ACCESSORIES
Porting and polishing tools are what we do at CC Specialty. It is what we started with and it is what we know better than anyone. We sell the best tools at any price! Our products have millions of applications, but porting and polishing is our Specialty. No one else even comes close to our equipment for ability and versatility! We are well known in the racing circles as the "go to" company for porting and polishing tools.
#20 CC Kit
#20 CC KIT
Includes the #TXMC Hang-up Motor-Metal Foot-Control-Flexible Shaft & Sheath
1-#TXMC Hang-up Motor complete HAS FULL POWER AT ANY SPEED
#10 CC Kit
#10 CC KIT
Includes the TXMC Hang-up Motor- Metal Foot-Control- Flexible shaft & sheath
1-#TXMC Hang-up Motor complete HAS FULL POWER AT ANY SPEED
Alumni-Hogs 1/4"
ALUMNI-HOGS
R-HOG B-HOG C-HOG F-HOG DD-HOG D-HOG
Carbide Cutters 1/4"
1/4"SHANK CARBIDE
1/4X4" Shanks -$25.50 1/4X2" Shanks -$24.00
COMES SPIRAL CUT (AS SHOWN) UNLESS OTHERWISE SPECIFIED
44MC Handpiece
#44MC TAPERED HANDPIECE
ONE OF OUR BEST SELLING STRAIGHT HANDPIECES
The #44MC Taper is for all general work and one of our best selling straight handpieces. Works with shank sizes up to 1/4". The tapered #44MC has a one-piece shaft with sealed ball bearings. Comes with a 1/4", 1/8", and 3/32" collets and the pin with wrench for changing the collets. Extra Collets available including 3mm and 6mm $7.95 No Lubrication required.
TXMC Motor
TXMC STAND MOTOR
TXMC HANG UP MOTOR
Motor Includes
THE TXMC COMES WITH SEALED BALL BEARINGS. HAS FULL POWER AT ANY SPEED - 1/3 HP! FAST ENOUGH FOR CAST IRON AND POWERFUL ENOUGH TO RUN SLOW IN ALUMINUM. THERE IS NO NEED FOR EXPENSIVE, NOISY AIR COMPRESSORS. THE TXMC ELECTRIC MOTOR IS QUIET AND POWERFUL.
Foot-Control (with full torque at
any speed) and the Flexible Shaft and Sheath.
